Journals Information
Universal Journal of Electrical and Electronic Engineering Vol. 2(7), pp. 286 - 293
DOI: 10.13189/ujeee.2014.020704
Reprint (PDF) (468Kb)
De-Coupled Power System Analysis Using Parameter Injection Method
Farhana Umer 1,*, Syed Usman Sabir 2, Noor KHAN 3, Muhammad Ali Mughal 4, Hassan Gauhar 5, AftaB Ahmed Almani 5, Ghulam Fizza SHAH 6
1 Electrical Department, Mevlana University, Konya, Turkey
2 Electrical Department, UCE&T, The IUB, Bahawalpur, Pakistan
3 Electrical Department, Mehran UET, Jamshoro, Pakistan
4 Electrical Department, Beijing University, Beijing, China
5 Electrical Department UCE&T, The IUBUCE&T, Bahawalpur, Pakistan
6 Telecommunication Department, The IUB, Bahawalpur, Pakistan
ABSTRACT
In order to meet with the increasing demand of electrical energy and wide spread of energy consumers in an area, the decentralized power generation (DPG) is becoming more popular. In DPG mostly the renewable energy sources are used. These renewable energy sources acts as the small grids integrated into the main power system. Now for management, optimized operation and stability of the existing system the power flow analysis must be done at the connecting point of these grids. In order to perform load flow analysis the system analysis model is needed. In general system's analysis, whenever the system structure changes we have to change the analysis model. As we know those DPG units are 鈥榠n' and 鈥榦ut' of the system frequently, so this results in the change of the system structure. So every time the system structure is change we have to recreate the analysis model therefore by using the classical load flow analysis method, load flow calculation become complex. This paper introduces a new technique of parameter injection at the joining points of grid to reduce the load flow analysis complexity. There is no need to recreate the analysis model again and again whenever the system structure changes.
KEYWORDS
Decentralized Power Generation, Renewable Energy Sources, Power Flow Analysis, Parameter Injection
Cite This Paper in IEEE or APA Citation Styles
(a). IEEE Format:
[1] Farhana Umer , Syed Usman Sabir , Noor KHAN , Muhammad Ali Mughal , Hassan Gauhar , AftaB Ahmed Almani , Ghulam Fizza SHAH , "De-Coupled Power System Analysis Using Parameter Injection Method," Universal Journal of Electrical and Electronic Engineering, Vol. 2, No. 7, pp. 286 - 293, 2014. DOI: 10.13189/ujeee.2014.020704.
(b). APA Format:
Farhana Umer , Syed Usman Sabir , Noor KHAN , Muhammad Ali Mughal , Hassan Gauhar , AftaB Ahmed Almani , Ghulam Fizza SHAH (2014). De-Coupled Power System Analysis Using Parameter Injection Method. Universal Journal of Electrical and Electronic Engineering, 2(7), 286 - 293. DOI: 10.13189/ujeee.2014.020704.