Journals Information
Universal Journal of Electrical and Electronic Engineering Vol. 3(4), pp. 107 - 111
DOI: 10.13189/ujeee.2015.030401
Reprint (PDF) (346Kb)
Enhanced Locating Method for Cable Fault Using Wiener Filter
Jeong Jae Han 1, So Ryoung Park 1,*, Jeong-Chay Jeon 2, Taek-Hee Kim 2, Jae-Gen Yoo 2
1 Department of Information Communications & Electronics Engineering, The Catholic University of Korea (CUK), Republic of Korea
2 Electrical Safety Research Institute, Korea Electrical Safety Corporation (KESCO), Republic of Korea
ABSTRACT
Time domain reflectometry (TDR) has been widely used for detecting the fault location and fault type of power cable due to the low computational load and good adaptability. However, it is vulnerable in the cable characteristic, such as delay and attenuation fluctuating with frequency. In this paper, we execute the channel estimation using Wiener filter to compute the most similar estimated signal with the injected reference signal, and provide experimental results to show the performance improvement of fault detection and location using TDR with Wiener filter in power cable.
KEYWORDS
Time Domain Reflectometry (TDR), Correlation Function, Wiener Filter, Gaussian Chirp, Power Cable
Cite This Paper in IEEE or APA Citation Styles
(a). IEEE Format:
[1] Jeong Jae Han , So Ryoung Park , Jeong-Chay Jeon , Taek-Hee Kim , Jae-Gen Yoo , "Enhanced Locating Method for Cable Fault Using Wiener Filter," Universal Journal of Electrical and Electronic Engineering, Vol. 3, No. 4, pp. 107 - 111, 2015. DOI: 10.13189/ujeee.2015.030401.
(b). APA Format:
Jeong Jae Han , So Ryoung Park , Jeong-Chay Jeon , Taek-Hee Kim , Jae-Gen Yoo (2015). Enhanced Locating Method for Cable Fault Using Wiener Filter. Universal Journal of Electrical and Electronic Engineering, 3(4), 107 - 111. DOI: 10.13189/ujeee.2015.030401.