Journals Information
Advances in Pharmacology and Pharmacy Vol. 1(2), pp. 58 - 67
DOI: 10.13189/app.2013.010203
Reprint (PDF) (1251Kb)
Fabrication of Specially Designed Novel Mould for Casting of Perindopril Erbumine Mouth Dissolving Film
Vivekanand K. Chatap*, Abhijit M. Karale, Pramod Wagh, Prashant K. Deshmukh
Department of Pharmaceutics & Industrial Pharmacy, H. R. Patel Institute of Pharmaceutical Education and Research, Shirpur, Maharashtra, India-425405
ABSTRACT
In present investigation attempt was made to designed novel mould with aim to overcome the problems occurs during casting of mouth dissolving films. Placebo and Perindopril Erbumine containing mouth dissolving film (MDF) were prepared with Pullulan, HPMC E-15 as film forming agent and other excipient by solvent casting method on specially design mould and regular petri dish. The HPMC E-15 125mg and Propylene Glycol 30 渭 ml as plasticizer contains MDFs formulation (H2) were found to be optimized when compared with Pullulan on the basis of physical evaluation parameters like weight variation, drug, thickness in the range 0.01-0.03 mm, disintegration time in <17sec. and release of drug from film was found to <60sec and other parameters were found within acceptable limit. The prepared optimized stable mouth dissolving films were characterized by SEM, FT-IR, DSC etc. and various new equipments were used first time in PMDFs preparation for cutting, pill-out and water level indicator for balancing novel mould in oven, which was widely used in other field like engineering and physics. Especially design mould for casting of film was found to be more efficient than regular petri dish due to easy scale up and avoid problems occurs during preparation of stable mouth dissolving film which leads to reduce the wastage of active ingredients and excipients.
KEYWORDS
Novel Mould, Solvent Casting Method, Pullulan, & HPMC E-15, Perindopril Erbumine and Mouth Dissolving Film
Cite This Paper in IEEE or APA Citation Styles
(a). IEEE Format:
[1] Vivekanand K. Chatap , Abhijit M. Karale , Pramod Wagh , Prashant K. Deshmukh , "Fabrication of Specially Designed Novel Mould for Casting of Perindopril Erbumine Mouth Dissolving Film," Advances in Pharmacology and Pharmacy, Vol. 1, No. 2, pp. 58 - 67, 2013. DOI: 10.13189/app.2013.010203.
(b). APA Format:
Vivekanand K. Chatap , Abhijit M. Karale , Pramod Wagh , Prashant K. Deshmukh (2013). Fabrication of Specially Designed Novel Mould for Casting of Perindopril Erbumine Mouth Dissolving Film. Advances in Pharmacology and Pharmacy, 1(2), 58 - 67. DOI: 10.13189/app.2013.010203.