Journals Information
Universal Journal of Electrical and Electronic Engineering Vol. 6(2A), pp. 22 - 28
DOI: 10.13189/ujeee.2019.061305
Reprint (PDF) (4393Kb)
Simulation of Low Noise Amplifier (LNA) of GEOS Satellite Signal Receiver for Mobile Terminal Satellite Application at S-Band Frequency
Resa Pramudita *
Department of Electrical Engineering, Faculty of Engineering, Widyatama University, Indonesia
ABSTRACT
In this paper described the process of making a Low Noise Amplifier (LNA) for GEOS Satellite for terminal mobile satellite at S-Band frequence. Step process of LNA design are choosing the right Transistor, Making a biasing circuit of Transistor, searching the value of ZS and ZL, , and built an Impedance Matching of the Transistor. The choosen Transistor is ATF58143 from Avago Technology. Bias voltage were used to Transistor in order to make transistor working at its working area. At this condition, we get Noise Figure (NF) minimum at 0.4 dB and Maximum stable amplifying at 20.413 dB as a paramater of the optimum LNA. The design of LNA will be simulated using a software Advanced Design System (ADS).
KEYWORDS
LNA, 3GPP, ADS, Mobile Satellite Receiver
Cite This Paper in IEEE or APA Citation Styles
(a). IEEE Format:
[1] Resa Pramudita , "Simulation of Low Noise Amplifier (LNA) of GEOS Satellite Signal Receiver for Mobile Terminal Satellite Application at S-Band Frequency," Universal Journal of Electrical and Electronic Engineering, Vol. 6, No. 2A, pp. 22 - 28, 2019. DOI: 10.13189/ujeee.2019.061305.
(b). APA Format:
Resa Pramudita (2019). Simulation of Low Noise Amplifier (LNA) of GEOS Satellite Signal Receiver for Mobile Terminal Satellite Application at S-Band Frequency. Universal Journal of Electrical and Electronic Engineering, 6(2A), 22 - 28. DOI: 10.13189/ujeee.2019.061305.