Journals Information
Universal Journal of Materials Science Vol. 1(4), pp. 177 - 179
DOI: 10.13189/ujms.2013.010401
Reprint (PDF) (278Kb)
Synthesis of Tetragonal Barium Titanate in the Concentrated Light Energy Field
M.S. Payzullakhanov *
Institute of Material-sciences SPA “Physics-Sun” AS RUz 100084 Tashkent, Bodomzor Road str., 2-B
ABSTRACT
Barium titanate ceramic samples were synthesized from mixture of TiO2+BaCO3 under influence of concentrated light flux of 200 Wt/cm2 at 2000℃ followed by quenching (A-type) and by the ceramic technology at 1350℃ followed by cooling at the rate of 100℃/min (B-type). The both types of samples had tetragonal symmetry lattice with the parameters a=0.399 nm and c=0.403 nm, however their tetragonality degree δ = c/a – 1 slightly differed (0.01 and 0.007 for A- and B-type, respectively). Dielectric permittivity value was 3800 for A-type and 3400 for B-type; bending deformation began at 66 MPa for A-type and 49 MPa for B-type.
KEYWORDS
Syntheses, Light Energy, Material
Cite This Paper in IEEE or APA Citation Styles
(a). IEEE Format:
[1] M.S. Payzullakhanov , "Synthesis of Tetragonal Barium Titanate in the Concentrated Light Energy Field," Universal Journal of Materials Science, Vol. 1, No. 4, pp. 177 - 179, 2013. DOI: 10.13189/ujms.2013.010401.
(b). APA Format:
M.S. Payzullakhanov (2013). Synthesis of Tetragonal Barium Titanate in the Concentrated Light Energy Field. Universal Journal of Materials Science, 1(4), 177 - 179. DOI: 10.13189/ujms.2013.010401.